Search
NANO HC hot catalysis line purification module
Zero air molecule icon (N2 and O2)

NANO HC

Integrated Hot Catalysis THC Removal

LEMAN Instruments designed the NANO HC to fit almost any application that needs an independent supply of THC-free gas close to the consumer, in the same elegant, compact laboratory casing as the NANO ZA and NANO N2, that can be stacked into our NANO TOWER or used independently.

The NANO HC integrates a hot catalysis module directly into the NANO casing.

Gas, supplied from central distribution or an external compressor – air, N2, O2 or any other compatible gas – is processed through the hot catalysis process to remove THC. After the purification process, gas is filtered of remaining particulates down to 0.01 µm.

This is a pure catalysis process with no pressure regulation: outlet pressure follows the inlet pressure. A model with an outflow of up to 3 NL/min is available, delivering <50 ppb THC, CO and CH4.

This system has been developed to be flexible across gas types: it is used in general on an air line but can remove THC from N2, O2 or any other gas within the manufacturer’s recommendation. The NANO HC concept is to be touched one time once the installation is done, and then this is it.

There are no consumables or short-term maintenance to do. It can be stacked into the NANO TOWER combined gas generator solution or used totally independently.

Features

  • No maintenance.
  • Extremely affordable.
  • Flexible use on different gases.
  • Improves resolution and detection limit; provides high pressure stability.
  • Gas without THC available 24/7.
  • Independent source of THC-free gas – needs only dry, oil-free gas and electricity; can easily be moved around the laboratory.
  • No handling, no storage, no cylinder rental fee.

Models

NANO HC

Max outflow @1013 hPa / 20°C

NANO HC : 3 LPM

Output purity

  • <50ppb THC
  • <50ppb CO
  • <50ppb CH4
  • particulates <0.01µm

Input gas

Oil-free and dried gas, minimum -20°C dew point

Outlet pressure

No pressure regulation – outlet pressure follows the inlet pressure

Compressed air

Oil-free and dried gas (min -20°C dew point)

Inlet / outlet fittings

Stainless steel 1/8″ compression

Power supply

Automatic switching from 90 to 260 VAC, 47 to 63 Hz

Power consumption

Maximum 100W

Manual control

None – no pressure regulation

Dimensions cm / in

  • L: 43 cm / W: 23 cm / H: 10 cm
  • L: 16.9in / W: 9.1in / H: 3.9in

Net weight

8 kg / 18 lbs

Format

Stackable NANO casing (NANO TOWER)