- Application Types
- Purge gas for FTIR
- CO2-free Zero Air
AERO FTIR L
UHP Air Generator for FTIR Spectrometers
LEMAN Instruments designed the AERO FTIR L product line of UHP Air Generators for FTIR spectrometers to fit almost any application that needs CO2- and moisture-free purge air close to the consumer in the laboratory environment.
Compressed air, supplied from central distribution or an external air compressor, is first filtered from CO, CH4 and HC; then, based on the field-proven Pressure Swing Adsorption (PSA) technology, CO2, moisture and remaining HC are removed.
After the purification process, UHP air is filtered of remaining particulates and pressure is regulated electronically to the set value, between 0.5 and 5 bar. Models with outflows of max 1.5 and 3 L/min air are available.
Each instrument has high-performance communication interfaces (Ethernet) to create a flexible gas network with local or central control. The software is focused on safety, automatic regulation and reliable communications, so the AERO FTIR L Generator is easy to install, reliable, safe and pleasant to operate.
Features
- Reduces operating costs – return on investment within 1 year.
- No maintenance or consumables.
- Improves resolution and detection limit; provides high pressure stability.
- UHP Air available 24/7 at constant purity. No contamination.
- Independent source of Ultra High Purity Air – needs only a dry, oil-free compressed air supply and electricity; can easily be moved around the laboratory.
- Remote control.
- Very safe operation: internal leak-test, automatic shut-down, protection against over-temperature.
- No handling, no storage, no cylinder rental fee.
Gas
Models |
|
Max outflow @1013 hPa / 20°C |
|
Output purity |
|
Dew point | -60 °C |
Outlet pressure | From 0.5 to 7 bar (7 to 102 psig) |
Site & Installation
Compressed air | External supply – oil-free dried compressed air according to DIN ISO 8573-1 class 3 |
Inlet air pressure | Minimum 2 bar (29 psig) over the outlet pressure to Maximum 10 bar (145 psig) |
Inlet / outlet fittings | Stainless steel, respectively 1/4″ and 1/8″ compression |
Power supply | Automatic switching from 90 to 260 VAC, 47 to 63 Hz |
Power consumption | 50W maximum at full flow |
Ambient temperature | +10 to +35°C |
Manual control | Through a 7″ TFT-LCD colour display with a touchpad on the front panel. Display of major parameters, pressure, functioning status and alarms. Intuitive navigation to functions by menus and sub-menus. |
Remote control | Through Ethernet 10/100 network RJ45 |
Dimensions & Weight
Dimensions cm / in |
|
Net weight | 12 kg / 26 lbs |
Format | Stackable bench casing |