Search
fidstation50rc rack hydrogen zero air
Hydrogen H2 molecule icon
Zero air molecule icon (N2 and O2)

FIDSTATION50RC

High-Purity Hydrogen & Zero-Air Generator for CEM/AQMS

LEMAN Instruments designed the FIDSTATION50RC to supply, from a single independent instrument, both the combustion Hydrogen and the Zero Air required by FID-based Continuous Emission Monitoring (CEM) and Air Quality Monitoring System (AQMS) stations, in an elegant 19″ casing with a full-colour display and touchpad.

The FIDSTATION50RC combines a HYDRO50 Hydrogen generator – PEM cell technology producing pure H2 from electricity and high-quality deionized water – with an AERO50 Zero Air generator – PSA technology fed by an onboard oil-free compressor – in one instrument.

H2 and Zero Air are each available 24/7 at constant purity: 250 Nml/min H2 and 2.5 L/min Zero Air. RS485, USB and Ethernet interfaces build a flexible, centrally controlled gas network for safe, continuous, cylinder-free CEM/AQMS operations.

Features

  • Single instrument supplies both combustion H2 and Zero Air for FID analyzers
  • Reduces operating costs and simplifies CEM/AQMS shelter logistics
  • H2 and Zero Air available 24/7 at constant purity
  • No contamination
  • Integrated compressor – fully independent gas supply, no cylinders
  • Low-noise compressor
  • Very safe operation: internal leak-test, automatic shutdown, over-pressure valve, current & voltage limits
  • No cylinder handling, storage, or rental fee

Models

FIDSTATION50RC – 250/2.5

Max outflow @ 1013 hPa / 20 °C

  • FIDSTATION50RC : 0.250 LPM (250 Nml/min)
  • FIDSTATION50RC : 2.5 LPM

Output purity

  • H2: >99.9995% (maximum HC content: 0.1 ppm)
  • Zero Air: <10 ppm H2O, <0.5 ppm HC, <0.5 ppm CO and CH4, particulates <0.01 µm

Dew point

H2: -50 °C | Zero Air: <10 ppm H2O

Outlet pressure

H2: 0.5-10 bar (7-145 psig) | Zero Air: 0.5-5 bar (7-72 psig)

Compressed air

Internal, oil-free compressor – included (feeds the Zero Air PSA module)

Water quality

High-purity deionized water (DI water); TOC free

Water source

External 5 L tank or central distribution network

Water consumption

5 L water generates about 6000 L of Hydrogen

Inlet / outlet fittings

H2: stainless steel 1/8″ OD compression – Zero Air: 1/4″ inlet, 1/8″ outlet

Power supply

Automatic switching from 90 to 260 VAC, 47 to 63 Hz

Power consumption

Maximum 600 W at full flow (combined H2 150 W + Zero Air 450 W)

Ambient temperature

+10 to +35 °C, non-condensing

Manual control

Through a 7″ TFT-LCD colour touchscreen with dual-gas display on the front panel. Menus and sub-menus for both gases.

Remote control

  • RS485 (ModBus), USB
  • Ethernet 10/100 network RJ45
  • Logbook download by USB

Safety

  • Low H2 stored volume
  • overpressure valve
  • internal leak test
  • automatic shut-down
  • current & voltage limits
  • over-temperature protection

Dimensions cm / in

  • L: 55 cm / W: 41.5 cm / H: 12 cm
  • L: 21.7 in / W: 16.3 in / H: 4.7 in (3U)

Net weight

35 kg / 77 lbs

Format

19″ rack, 3U