Gas generator line · Deuterium (D₂)
Deuterium generators
> 99.9995 % chemical purity, 0.3 to 5 L/min — deuterium made on demand from heavy water.
Deuterium usually travels across continents in custom-filled cylinders. DIHYDRO generators make it where you need it, from a small reservoir of heavy water, at the exact moment you need it — with no caustic solution and no stored high-pressure gas.
The same proven electrochemical platform as our HYDRO line, in three flows: bench-top, floor module and production cabinet.
> 99.9995 %
chemical purity (LS, LS2)
≤ 0.1 ppm
hydrocarbons
≈ 1,000 L
of D₂ per kg of heavy water
0.3–5
L/min
How it works
Deuterium in four steps
Heavy water in, ultra-pure deuterium out — nothing else to handle.
01
Heavy water
A reservoir of heavy water is the only consumable — each kilogram of D₂O gives about 1,000 litres of D₂.
02
Membrane electrolysis
A solid polymer membrane separates deuterium from oxygen. No caustic solution.
03
Purification
Two permeation stages and a final dryer bring the dew point down to –50 °C.
04
To your process
D₂ regulated electronically from 0.5 to 10 bar, started and stopped on demand.
Purity
What you get
Two different purities: the chemical purity is made by the generator, the isotopic purity comes from the heavy water you feed it.
Chemical purity — guaranteed
> 99.9995 %
HC ≤ 0.1 ppm
- DIHYDRO50 LS and LS2
- DIHYDRO50 L: > 99.999 %
- Dew point –50 °C
This is what the generator controls: every impurity other than hydrogen isotopes.
Isotopic purity
Your heavy water
sets the atom % D
- Depends on the isotopic enrichment of the D₂O supplied
- Choose the D₂O grade your application needs
Optical fibre, labelled standards and D₂ lamps each have their own requirement.
Efficiency
≈ 1,000 L
of D₂ per kg of D₂O
- No caustic solution
- No stored high-pressure gas
- Production on demand
Semiconductor annealing, deuterated synthesis, fusion and neutron sources.
Formats
Choose your flow
From a bench-top unit for the laboratory to a cabinet built for a production cell.
Bench-top
DIHYDRO50 L
0.3 L/min
Compact casing with touchscreen, for laboratory and R&D use.
Floor module
DIHYDRO50 LS
1 L/min
Continuous duty for pilot lines and industrial processes.
Production cabinet
DIHYDRO50 LS2
5 L/min
Five times the LS flow at the same purity, for production cells.
Where DIHYDRO generators work
- Optical fibre deuterium loading
- Semiconductor annealing and surface passivation
- Deuterated OLED materials
- Deuterated drugs (catalytic H/D exchange)
- Labelled standards for LC-MS and NMR, D₂ arc lamps
- Fusion fuel and neutron sources
Common to every model
- Electrochemical membrane process — no caustic solution
- Dew point –50 °C, electronically regulated outlet
- 7″ colour touchscreen
- Automatic switching 90 – 260 VAC
- +5 °C to +35 °C ambient
- No custom-filled cylinders, no import logistics
Planning a deuterium process?
Tell us your flow, your purity and your duty cycle — we size the DIHYDRO that fits.