- Application Types
- Purge gas for FTIR
- CO2-free Zero Air
AERO FTIR LS
UHP Air Generator for FTIR Spectrometers
LEMAN Instruments designed the AERO FTIR LS product line of UHP Air Generators for FTIR spectrometers to fit almost any application that needs Ultra-High-Purity Air close to the consumer in the laboratory environment.
Compressed air, supplied from central distribution, is first filtered from CO, CH4 and HC; then, based on the field-proven Pressure Swing Adsorption (PSA) technology, CO2, moisture and remaining HC are removed.
After the purification process, UHP air is filtered of remaining particulates and pressure is regulated electronically to the set value, between 0.5 and 5 bar. Models with outflows of 20 L/min air are available.
Each instrument has high-performance communication interfaces (Ethernet) to create a flexible gas network with local or central control. The software is focused on safety, automatic regulation and reliable communications, so the AERO FTIR LS Generator is easy to install, reliable, safe and pleasant to operate.
Features
- Reduces operating costs – return on investment within 15 months.
- No maintenance or consumables.
- Improves resolution and detection limit; provides high pressure stability.
- Silicone-free air.
- UHP Air available 24/7 at constant purity. No contamination.
- Independent source of Ultra High Purity Air – needs only a dry, oil-free compressed air supply and electricity; can easily be moved around the laboratory.
- Remote control.
- No handling, no storage, no cylinder rental fee.
Gas
Models | AERO FTIR LS-20 |
Max outflow @1013 hPa / 20°C | AERO FTIR LS-20 : 20 LPM |
Output purity |
|
Dew point | -60 °C |
Outlet pressure | From 0.5 to 7 bar (7 to 102 psig) |
Site & Installation
Compressed air | External supply – oil-free dried compressed air according to DIN ISO 8573-1 class 3. Inlet pressure must be at least 2 bar above the AERO FTIR LS output pressure. |
Inlet air pressure | Minimum 2 bar (29 psig) to Maximum 10 bar (145 psig) |
Inlet / outlet fittings | Stainless steel 1/8″ compression |
Power supply | Automatic switching from 90 to 260 VAC, 47 to 63 Hz |
Power consumption | Maximum 350W |
Ambient temperature | +10 to +35°C |
Manual control | Through a 7″ TFT-LCD colour display with a touchpad on the front panel. Display of major parameters, pressure, functioning status and alarms. Intuitive navigation to functions by menus and sub-menus. |
Remote control | Through Ethernet 10/100 network |
Dimensions & Weight
Dimensions cm / in |
|
Net weight | 45 kg / 99 lbs |
Format | Stackable floor-standing casing |