- Application Types:
- Makeup gas for GC, without organic compound trace
- ICP, ELSD, CORONA, incubators
- Carrier gas for calibrators
- 3D Printers
NITRO50 RC
LEMAN Instruments designed the NITRO50RC product line of Ultra High Purity Nitrogen Generator with integrated air compressor to fit almost any type of application which needs an independent supply of pure Nitrogen close to the consumer in an elegant 19” casing with full-color display and touchpad.
Compressed Air is first filtered from particulates down to 5µm and dried by a static dryer. Based on the field-proven Pressure Swing Adsorption (PSA) technology, Nitrogen is extracted from a set of filters filled with CMS. After the extracting process, N2 passes through a hot catalytic chamber to remove the last traces of organic compounds. It is then stored in a buffer and filtered of remaining particulates down to 0.01µm; finally, the output pressure is regulated electronically to the set value, between 0.5 and 5 bar.
Models with outflows of 500 Nml and 1 NL/min N2 are available.
Each instrument is equipped with high-performance communication interfaces USB, RS485 & Ethernet to create a very flexible gas network with local or central control.
Due to the software being focused on safety, automatic regulation, and intuitive and reliable communications, the NITRO50RC is easy to install, reliable, safe, and pleasant to operate.
Features
- Reduces in operation costs. Return on investment within 15 months.
- Improves resolution and detection limit. Improves baseline stability.
- Nitrogen is available 24/7 at constant purity. No contamination.
- Independent source of N2. Does not require complex piping. Can be easily moved around the laboratory.
- No handling, No storage, No cylinder rental fee.
Gas
Models | NITRO50 RC-500 NITRO50 RC-1 |
LPM Outflow @1013/20°C | NITRO50 RC-500: 0.5 LPM NITRO50 RC-1: 1 LPM |
N2 purity |
|
Dew point | -50°C |
Outlet Pressure | From 0.5 to 5 bar (7 to 102 psig) |
Site & Installation
Compressed AIR | Supplied by an internal oil-free compressor |
Manual control | Through a 7″ TFT-LCD color touchscreen located on the front panel. Display of major parameters, functioning status, and alarms. Intuitive navigation to functions by menus and sub-menus |
Remote control, Communications | Through Ethernet 10/100 network |
Input & Output fittings | Stainless steel 1/8″ compression |
Power supply | Automatic switching from 90 to 260 VAC, 47 to 63 Hz |
Power consumption (max at full flow) | Maximum 750W |
Ambient temperature | +10 to +35°C |
Dimensions & Weight
Dimensions cm/in | L: 35cm/1:41.5cm / H:12cm (3U) L: 13.7in/1:16.in / H: 4.7in (3U) |
Net weight (kg/lbs) | 19kg/41lbs |