Search
  • Application Type:
  • Combustion gas for FID Analyzers
  • Carrier gas for Gas Chromatographs
  • Fuel Cell Research, Protection gas
  • Reaction gas for ICP-MS

HYDROCLEAR

LEMAN Instruments designed the HYDROCLEAR product line of High Flow, Ultra High Purity Hydrogen Purifier to aliment GCs, for research on fuel cell and to fit almost any type of application which needs H2 production on demand close to the consumer in an elegant casing with full color display and touch screen.

Based on on drying technology, the H2 is purified and dried by passing through a SMART No Maintenance PSA. H2 is available 24/7 with constant purity >99.999995%. Output pressure is regulated electronically and could be set from 0.5 to 10 bar. This process can be started on demand and does not require any caustic solution.

The device is composed of several independent modules, connected in parallel. In case of failure, each module could be switched off and removed from the device, without interrupting the production of other modules.

Model can purify from 100 to 600 L/min H2 based on model

Each instrument is equipped with high performance communication interfaces (Ethernet) create a very flexible gas network with local or central control.

Due to the software being focused on safety, automatic regulation, and intuitive and reliable communications, the HYDROCLEAR are easy to install, reliable and pleasant to operate.

 

REQUEST A QUOTE

Features

  • Reduces in operation costs. Return on investment within 2 years. 
  • No maintenance.
  • Improves resolution and detection limit versus Helium-only usage. 
  • Provides high-pressure stability.
  • H2 is available on demand 24/7 at constant purity.  No contamination. 
  • An independent, on-demand source of Hydrogen that does not require complex piping and can be easily moved around the laboratory.  
  • Remote control
  • Very safe operation, internal leak-test, automatic shut-down, over-pressure valve, H2-cell current, and voltage limits.
  • With this product, you can say goodbye to the hassle of handling and storing cumbersome gas cylinders, and the additional cost of cylinder rental fees.
  • *based on O2 content independently verified by National Physical Laboratory, UK

Models

HYDROCLEAR

LMP Outflow @1013/20°C

 

HYDROCLEAR-5:5 LMP HYDROCLEAR-10: 10 LMP HYDROCLEAR-15: 15 LMP

H2 purity

 

>99,9995% (maximum HC content: 0.1ppm)

Dew point

-50°C

Outlet Pressure

From 0.5 – 10 bar (7 – 145 psig).

Water quality

High-purity deionized water (DI water). TOC free.

Water source

Connection to central distribution network Onboard Deionized water generator

Water consumption

12L water generates about 12 m3 of Hydrogen

Safety

Low H2 stored volume; overpressure valve; leak test; automatic shut down; maximum current limit; water quality

Manual control

Through a 7” TFT-LCD color display with touchscreen, located on the front panel. Display of significant parameters, functioning status, and alarms. Intuitive navigation to functions by menus and sub-menus

Remote control, Communications

  • Through 2 potential free relay contacts (I/O)
  • RS485 (Mod-Bus), USB
  • Through Ethernet 10/100 network

Input & Output fittings

Stainless steel 1/4″ OD compression

Power supply

Automatic switching from 90 VAC to 260 VAC, 47 to 63 Hz

Power Consumption (Max at full flow)

HYDROCLEAR-5: maximum 2000W HYDROCLEAR-10: maximum 2500W HYDROCLEAR-15: maximum 3000W

Ambient temperature

+5 to +35°C, non condensing.

Dimensions

cm / in

L: 80cm / I: 55cm / H: 120cm (Variable)

L: 31.4in / I: 21.6in / H: 47.2in (Variable)

Net weight (kg/lbs)

80kg-100kg  /  176lb-246lb

Additional items for your generator