- Application Types:
- Combustion gas for GC
- Zero gas for HC calibrators
- Carrier gas for permeation tube systems
AERO50 LC
LEMAN Instruments designed the AERO50LS2 product line of High-Flow Ultra-Zero Air generators to fit almost any type of laboratory application that needs an independent ultra-pure and dry air source.
Compressed air is first filtered from particulates down to 5µm and partially dried. Then, it passes through a hot catalytic chamber to remove CO, CH4, and HC. Based on the field-proven Pressure Swing Adsorption (PSA) technology, air passes through a set of filters filled with molecular sieve and activated charcoal to be dried and cleaned from the last traces of HC.
After the purification process, the air is filtered of remaining particulates down to 0.01µm, and pressure is regulated to the set value, between 0.5 and 5 bar (7 to 72 psig).
Models with 40, 80, and 120 NL/min AIR outflows are available.
Each instrument has high-performance communication interfaces (Ethernet) to create a flexible gas network with local or central control.
Due to the software being focused on safety, automatic regulation, and reliable communications, the AERO50LS2 is easy to install, reliable, safe, and pleasant to operate.
Features
- Reduces in operation costs. Return on investment within 9 months.
- Improves resolution and detection limit. Provides High-pressure stability.
- UHP-AIR is available 24/7 at constant purity. No contamination.
- Independent source of Ultra High Purity Air. Needs only a dry, oil-free compressed air supply and electricity. It can be easily moved around the laboratory.
- Stackable casing for low-footprint gas generator network assembly.
- Very safe operation, internal leak-test, automatic shut-down, protection against over-temperature.
- No handling, No storage, No cylinder rental fee
Gas
Models | AERO50 L-1.5 AERO50 L-3 |
LPM Outflow @1013 HPA /20°C |
|
Dew point | < 10ppm |
Outlet pressure | From 0.5 to 5 bar (7 to 72 psig) |
Site & Installation
Compressed AIR | Supplied by internal oil-free piston compressor |
AIR pressure | Minimum 1.5 bar (20 psig) Maximum 11 bar (159 psig) |
Manual control | Through a 7″ TFT-LCD color display with a touchpad located on the front panel. Display of major parameters, pressure, functioning status, and alarms. Intuitive navigation to functions by menus and sub-menus |
Remote control, Communications | Through Ethernet 10/100 network RJ45 |
Input & Output fittings | Stainless steel 1/8″, or 1/4″ compression |
Power supply | Automatic switching from 90 VAC to 260 VAC, 47 to 63 Hz |
Power consumption (max at full flow) | Maximum 700W |
| Ambient Temperature | +10 to +40°C |
Dimensions & Weight
Dimension cm / in | L: 61cm/ l : 22.5cm /H : 36.5cm L: 24in / l: 8.6in /H: 14.1in |
Net weight (kg/lbs) | 25kg / 55lbs |