- Application Types:
- Combustion gas for Gas Chromatographs
- Zero gas for AQM calibrators
- Carrier gas for permeation tube systems
AERO50 L
LEMAN Instruments designed the AERO50L product line of Ultra Zero AIR Generator to fit almost any application that needs Ultra High Purity AIR close to the consumer in the laboratory environment.
Compressed air is first filtered from particulates down to 5µm and partially dried. Then, it passes through a hot catalytic chamber to remove CO, CH4, and HC. Based on the field-proven Smart Pressure Swing Adsorption (SPSA) technology, AIR passes through a set of filters filled with molecular sieve and activated charcoal to be dried and cleaned from the last traces of HC.
After the purification process, Air is filtered down to 0.01µm of remaining particulates, and pressure is regulated to the set value, between 0.5 and 7 bar (7 to 102 psig).
Models with outflow of 1.5 and 3 L/min AIR are available.
Each instrument has high-performance communication interfaces, such as Ethernet (RJ45), to create a flexible gas network with local or central control.
Due to the software being focused on safety, automatic regulation, and reliable communications, the AERO50L Ultra Zero AIR Generator is easy to install, reliable, safe, and pleasant to operate.
Features
- Reduces in operation costs. Return on investment within 1.5 years.
- Improves resolution and detection limit. Provides high pressure stability.
- UHP-AIR is available 24/7 at constant purity. No contamination.
- Independent source of Ultra High Purity Air. Needs only a dry, oil-free compressed air supply and electricity. It can be easily moved around the laboratory.
- Stackable casing for low-footprint gas generator network assembly.
- Remote control
- Very safe operation, internal leak-test, automatic shut-down, protection against over-temperature.
- No handling, No storage, No cylinder rental fee
Gas
Models | AERO50 L-1.5 AERO50 L-3 |
LPM Outflow @1013 HPA / 20°C | AERO50 L-1.5: 1.5 LPM AERO50 L-3: 3LPM |
AIR purity |
|
Output Pressure | From 0.5 to 5 bar, adjustable by software. (7 to 72psig) |
Dew point | < 10ppm |
Outlet Pressure | From 0.5 to 7 bar (7 to 102 psig) |
Site & Installation
Compressed AIR | Oil-free dried compressed air; according to DIN ISO 8573-1 class 3 |
AIR pressure | Minimum 1.5 bar (20 psig) Maximum 11 bar (159 psig) |
Manual control | Through a 7″ TFT-LCD color display with a touchpad located on the front panel. Display of major parameters, pressure, functioning status, and alarms. Intuitive navigation to functions by menus and sub-menus |
Input & Output fittings | Stainless steel, respectively 1/4″ and 1/8″ compression |
Power supply | Automatic switching from 90 to 260 VAC, 47 to 63 Hz |
| Ambient Temperature | +10 to +40°C |
Dimensions & Weight
Dimensions cm / in | L: 43cm / I: 23.5cm / H: 16cm L: 17in / I: 9in / H: 6.2in |
Net weight (kg/lbs) | 12kg / 26lbs |